开发工具:
文件大小: 332kb
下载次数: 0
上传时间: 2011-11-02
详细说明： Introduction This document describes configuration options for FTDIBUS.SYS. For most operating environments, the default configuration of FTDIBUS is sufficient for normal operation, and it is very unlikely that any of the parameters described here need to be altered. ResetPipeRequestRetryCount ResetPipeRequestRetryCount controls the maximum number of times that FTDIBUS tries to reset a pipe on which an error has occurred. ResetPipeRequestRetryCount defaults to 50. It may be necessary to increase this value in noisy enviro nments where a lot of USB errors occur. The default can be overridden via RetryResetCount in the FTDIBUS service key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\FTDIBUS\Parameters\RetryResetCount The device can be installed with ResetPipeRequestRetryCount set to any value by changing FTDIBUS.INF as shown in the following fragment. [FtdiBus_AddService.AddReg] HKR,Parameters,"RetryResetCount",0x10001,100 Here, the count is set to 100. MaxDevices MaxDevices is used to place a limit on the number of COM ports that can be created in a system by FTDIBUS. MaxDevices defaults to 0, meaning that the feature is disabled and FTDIBUS always attempts to create a COM port. The default can be overridden via MaxDevs in the FTDIBUS service key. Note that setting MaxDevs to a value other than zero will radically alter the behaviour of the driver; please contact FTDI if you think you have to change MaxDevs. HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\FTDIBUS\Parameters\MaxDevs The device can be installed with MaxDevs set to any value by changing FTDIBUS.INF as shown in the following fragment. [FtdiBus_AddService.AddReg] HKR,Parameters,"MaxDevs",0x10001,3 Here, the maximum number of devices is set to 3. Location IDs Location IDs is used to define the set of USB ports supported by FTDIBUS. It can be used in systems that require only certain USB ports to be available, perhaps in conjunction with MaxDevices. The default behaviour is that all USB ports are supported. The default can be overridden via LocIds in the FTDIBUS service key. Note that setting LocIds will radically alter the behaviour of the driver; please contact FTDI if you think you have to change LocIds. HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\FTDIBUS\Parameters\LocIds LocIds is a binary value that is interpreted as an array of Location IDs. A Location ID is a 32-bit unsigned integer (DWORD) that represents the location of the device in the USB tree. For example, if the driver creates a location string for the device of the form a&b&c, the location ID will be 0x00000abc. The device can be installed with LocIds set by changing FTDIBUS.INF as shown in the following fragment. [FtdiBus_AddService.AddReg] HKR,Parameters,"LocIds",1,21,00,00,00,32,00,00,00,11,00,00,00 Here, three USB ports are supported. Location ID 0x00000021 represents host controller 1 port 1. Location ID 0x00000032 represents host controller 2 port 2. Location ID 0x00000011 represents host controller 0 port 1. Location IDs can be obtained using the latest version of the utility USBView available from FTDI support. FTDI 19 January 2004 ...展开收缩
(系统自动生成,下载前可以参看下载内容)
下载文件列表
相关说明
- 本站资源为会员上传分享交流与学习,如有侵犯您的权益,请联系我们删除.
- 本站是交换下载平台，提供交流渠道，下载内容来自于网络，除下载问题外，其它问题请自行百度。
- 本站已设置防盗链，请勿用迅雷、QQ旋风等多线程下载软件下载资源，下载后用WinRAR最新版进行解压.
- 如果您发现内容无法下载，请稍后再次尝试；或者到消费记录里找到下载记录反馈给我们.
- 下载后发现下载的内容跟说明不相乎，请到消费记录里找到下载记录反馈给我们，经确认后退回积分.
- 如下载前有疑问，可以通过点击"提供者"的名字，查看对方的联系方式，联系对方咨询.
