" could be used for files in the directory up a level. - Minor correction to the advanced network test. Release 5.1 build 1003 WIN32 release 18 April 2006 WIN64 release 18 April 2006 - Changed the Advanced network test to allow a corrupt packet threshold value up to 1 million. - Bundled a new version of rebooter. Release 5.1 build 1002 WIN32 release 11 April 2006 WIN64 release 11 April 2006 - Corrections to the translation of V4.0 to V5 configuration files. Note: Configuration files in V5.x builds prior to V5.1 1002 could become corrupted if a V4.0 configuration file is loaded. - Corrected a bug where the main Window size and location were not restored on restarting BurnInTest. - Changes to the SMART attribute logging to support a greater range of Disk drive device drivers. Added additional Activity Level 2 trace logging. - Added an option to use CTS (Clear To Send) flow control in the loop back stage of the COM port test. - Corrected a bug where the CPU L3 cache could be reported as -1. - Help file updates. Release 5.1 build 1001 WIN32 release 30/March/2006 - Digitally signed the BurnInTest application to allow it to run under Windows Server "Longhorn". Note, previously only the installation package was digitally signed. - Updated the reported Operating system descriptions, including: - Windows Vista - Windows Server "Longhorn" - Corrected a bug where the Advanced network information was not displayed on the main window when it was run from a script. - The Advanced Network Corrupt threshold packet has been changed to produce an error every time the error is received after the threshold is reached. - Corrected the reporting of "Network, Packet discarded due to corrupt header" as a Network test error. - Corrected a bug where a new log file was not created if (only) the log prefix changed during the running of a script file. - Split the "Network, Advanced Network test error" error into 6 errors: "Network, Advanced Network test error" "Advanced Network Socket error" "Advanced Network Send error" "Advanced Network Send error - no data sent" "Advanced Network Receive error" "Advanced Network Receive error - no data received" Added either activity trace 1 or trace 2 logging for each of the errors, with additional information where available. - Added additional Serial port activity trace 2 logging. Including the logging of all transmit buffer data when the /B command line is used. Release 5.1 build 1000 WIN32 release 27/March/2006 (not a public release) Added the following features: - Create the log file directory specified in the Logging Options if it does not exist. - Condense the Advanced Network Test log files to one log file per IP address per script run, when run from a script. - Added an option to summarize duplicate errors in the log file. - Color coded errors based on severity in the Detailed event log Window and the HTML log file. - Added an option to only create a log file when BurnIn actually runs a test as opposed to every time BurnIn is executed. - Added a warning if a test thread completes with 0 cycles and 0 operations. - In the results summary html file, inserted more spacing between the 揘otes? and 揇etailed Event Log? - Changed the Activity Trace file format to be the same as the log file, ie. text or HTML, rather than always text. - The 2D 揝crolling H抯?test will now display across multiple screens/displays ?i.e. all active displays. - A threshold has been added for the 揷orrupt header ?packet discarded?event in the advanced network options so that a 揊ail?is not produced when that is the only thing that produces errors. - Added looping capability in scripting. LOOP n { ? } where n is the number of times to repeat the commands in the brackets. - Corrected a bug where PASS could be displayed if the Advanced Network test was the only test running, but it failed. Release 5.0 build 1001 WIN32 release 9/March/2006 - Corrected a bug where Network directory paths were not accepted, eg. for the log file name and post test application file name. - The CPU maths test has been improved to better load up all CPU's. Previously BurnInTest started a maths test thread per physical CPU package. BurnInTest has been changed to start a maths test thread per CPU (= num. physical CPU packages x num. CPU cores x num. logical CPUs). - The CPU preferences have been changed to allow the CPU maths test to be locked to any CPU (ie. select a CPU from a list of CPU's where the number of CPU's = num. physical CPU packages x num. CPU cores x num. logical CPUs). - The Parallel and Serial port error message have been modified in the case where a test plug may not have been connected to indicate that the user should check this. - Corrected a bug where a licenced version could display the message "[limited evaluation version]" Release 5.0 build 1000 WIN32 release 24/February/2006 WIN64 release 24/February/2006 NEW TESTS & IMPROVEMENTS TO EXISTING TESTS BurnInTest Standard and Professional versions. - Added a customer style results certificate. This will save the log file in HTML format but from the perspective of a end customer. This report style can be tailored by the user (through changing an HTML template). - An MP3 playback test has been added to the Sound test. - A color printer test has been added. - A new post test option to allow the results to be printed automatically at the end of a test has been added. - Added new Post-test action options of: - Optionally allow the user to "run an external program & exit" after BIT has been manually stopped. Modify the $RESULT variable to "PASS (manual abort)" or "FAIL (manual abort)" for this case. - Allow the results window to be displayed for all post test options (except Reboot). - Added new Pre-test actions to allow an external application to be run and have BIT wait for the application to exit. On continuing, BIT will run the subscript file (of scripting commands) if it has been created. - Changed the manual Stop buttons, to abort the running of a script (rather than just the current test). BurnInTest Professional specific. - Added a "Plugin" test that allows users to develop their own BurnInTest test modules for specialized hardware. Three external plugins may be specified at once. - A Modem test has been added to BurnInTest as a Plugin. PassMark's ModemTest Version V1.3 (latest build) is required. - A KeyBoard Test has been added to BurnInTest as a Plugin. PassMark's KeyboardTest Version V2.2 (latest build) is required. - A Firewire Test has been added to BurnInTest as a Plugin. PassMark's free Firewire plugin is required and a "Kanguru FireFlash" drive is required. - A new advanced network test has been added. BurnInTest Professional only. - The Memory test now allows the user to specify the type of test pattern to be used. - Testing with the USB 2.0 Loopback plug has been improved. When used with USB 2.0 Loopback device driver V2.0.1002, error details will now be reported for: CRC error reported by USB Host controller BIT STUFF error reported by USB Host controller DATA TOGGLE MISMATCH error reported by USB Host controller STALL PID error reported by USB Host controller DEVICE NOT RESPONDING error reported by USB Host controller PID CHECK FAILURE error reported by USB Host controller UNEXPECTED PID error reported by USB Host controller DATA OVERRUN error reported by USB Host controller DATA UNDERRUN error reported by USB Host controller BUFFER OVERRUN error reported by USB Host controller BUFFER UNDERRUN error reported by USB Host controller NOT ACCESSED error reported by USB Host controller FIFO error reported by USB Host controller TRANSACTION (XACT) ERROR reported by USB Host controller BABBLE DETECTED error reported by USB Host controller DATA BUFFER ERROR reported by USB Host controller In the case of these errors, BurnInTest will re-attempt the operation. The user can set the Error reporting to be skipped for the initial recovery attempt. IMPROVEMENTS TO TESTING FACILITIES - Added a disk autoconfig, such that when tests are started, the disk drives and settings will be defaults to all disks (exc. CD/DVD). This may be useful when testing multiple systems with different hard disk drive letters. - Store the position of the Main window on exiting BurnInTest. On starting BurnInTest, position the main window as saved; on starting tests, position the test windows as saved. - Allow a "drag & drop" of the Configuration file directly on the BurnInTest program icon. - Allow testing 99.5% to 100% of disk, instead of 94%, for disks that do not contain the Windows directory and do not contain a swap file. - Added the ability to log interim results, which may be useful for unstable systems. - AMD and Intel Dual core reporting added. - New L2 CPU cache sizes added to reports. - CPU support for SSE3, DEP and PAE added to reports. - Shortcut of "F1" for contextual help added to all Windows. - Improve the flexibility in specifying the EXECUTEWAIT scripting command for sleeper. - Updated logging header information with the hard and optical drive model. - The 2D and 3D tests have been updated to use DirectX 9.0c. - User interface updated. - The HTML report format has been improved. - The BurnInTest configuration file extension has been renamed from .cfg to use .bitcfg, to ensure the configuration file is associated with BurnInTest. - An error message indicating that accumulated log files are not supported when run from CD or DVD has been added. - To allow smaller test files with very large disks, the minimum disk test file size has been reduced from 0.1% to 0.01% of the disk space. - Log events were previously shown as "INFORMATION" if they were low level errors, or simply additional information (not errors). "INFORMATION" now refers to a low level error, and "LOG NOTE" now refers to additional information (that is not in the error count). - Improved the specific detail of the Serial Port errors detected. BurnInTest now reports framing errors, buffer overrun errors, input buffer overflow errors, parity errors and Transmit buffer full errors as specific error messages (rather than a broader error description). - Added the /k command line so the user can specify not to delete HDD test files if an error occurs. - Increased Activity trace level 1 error logging for Serial port testing. - Increased Activity trace level 1 error logging for Hyper threading detection. - Bundled a new version of the Rebooter program. - Improved the Serial port error logging (displaying baud rate) and increased Activity trace level 1 error logging (displaying erroneous data). - Modified the Window sizes to help improve navigation on smaller displays (i.e. 640x480). - The CPU load for the Standard and Torture RAM tests has been made more linear with the duty cycle setting. Note: This means that compared to the previous build of BurnInTest, less RAM test operations will be run per second (when the duty cycle is less than 100). - Additional debug code and very minor changes in the Loopback sound test. - The Post test option of "Run external application and exit" has been modified such that if no external file is specified, this Post test option will just exit BurnInTest. - Allowed the full range of PassMark USB1 loopback plugs to be used with BurnInTest Professional. - Added additional Activity Trace level 2 logging. - The delay inserted between packets in the USB2 test, when the duty cycle is less than 50, has been changed from at least 1ms to at least 1ms to 50ms (for a Duty Cycle of 49 down to 0). - The subscript commands to configure BurnInTest from an external application (i.e. specified in the bit-script-input.txt file and run by specifying either a pre-test or EXECUTEWAIT application) has been changed to allow "LOAD" commands (in addition to "SET" scripting commands). - Renamed the "Error" log to "Event" log. - Changed the order of the items in an Event log line, such that the Severity is the first item. - The EXECUTEWAIT script command has been modified such that the external application may provide an input script file (of SET... commands) to be run after the EXECUTEWAIT application closes. This allows external applications to define test environment parameters (such as the serial number and machine type). - Added scripting commands: SETSERIAL "1234-shdfgdhs-GHGHG" SETMACHINETYPE "HP XPS800" SETNOTES "Test notes defined by the external application." SETLOG "\Program Files\Plugin\plugin_log" SETPLUGIN "\Program Files\Plugin\plugin.exe" - Added POST TEST application parameter substitution to allow values to be passed to an external application at the end of a test. These are: $RESULT - "PASS" or "FAIL" will be substituted. $SERIAL - The serial number will be substituted. $MACHINETYPE - The machine type will be substituted. $NOTES - The notes will be substituted. - Added extra logging for memory allocation errors in the disk test - Added "log bad sector increase" and "bad sector threshold" options to disk test. This resulted in a change to the configuration file format and required additional code to automatically convert from old formats. - Modified the user interface in the preferences window for the disk test and the CD test - Improved the handling of USB 2.0 loopback plugs recovery from sleep states. BUG CORRECTIONS - Corrected a bug where the System and Application events logged in the BurnInTest Trace logs were wrong if the event log had reached its maximum size. - Checks that the Sound test files (WAV and MIDI) exist have been added. - The continuous auto updating of the USB image (USB Loopback plug vs. USB 2.0 Loopback plug) on the main window has been removed. This is now updated on BIT startup, selecting Refresh in USB preferences or on starting a test. If there is a serious USB problem, this (together with the USB 2.0 Loopback device driver, V2.0.1002) will avoid the possibility of BurnInTest locking up. - Corrected a bug with the Butterfly seek mode of the Disk test. This was found to occur with FAT32 disks where the Cylinder size was relatively small and the Sector size relatively large. - Reset Defaults on the Configuration Page now resets the Auto Stop Value. - Reset Defaults on the Configuration Page now resets the color indicators. - The CD test has been modified to skip invalid files either with "?"'s , to avoid reporting errors that are due to the CD test media filenames. - The Network test results window scroll bar has been corrected. - The Memory torture test could fail on some systems with a small amount of RAM and relatively high memory fragmentation. This has been corrected. - Scripting correction for .cmd files. - Corrected a bug that caused problems when running the disk test with SMART monitoring turned on. This problem only occurs on a small number of HDD's. - Corrected memory leaks - On occasion, the measured waveform from the loopback sound test may have been slightly altered on starting or stopping all tests, possibly enough to trigger an error. This has been resolved. - If an error occurred in the final second of a test, the error may have been logged but not included in the big PASS/FAIL results window. This has been corrected. - After running a script file that loaded a configuration file, that had a full path specified, the Save and Load configuration menu options no longer worked. This has been corrected. - Previously, the Version of BurnInTest was only written in the First log file after starting BurnInTest. This log line is now written in all log files. - For USB2 tests that have read or write failures, the Windows error codes are now included in the level 2 Activity trace log. - Command line parameters may now be passed to a PreTest application. - Log files may now use a single static filename. This may be useful when the log file is to be parsed by an external program. - Corrected a bug where the Plugin test would stop prematurely. - Corrected the specification of the Scripting EXECUTEWAIT filename. - Changed Script processing such that a script is aborted if a scripting error is encountered and Stop on error is selected. - Added an indication on the main window that a script is currently running ("Script currently running"). - Corrected the serial port test to identify non-existing plugs when the Disable RTS/CTS and DSR/DTR testing has been selected. - Corrected the display of strange results (666666) reported by a user, related to copy protection. - Fixed a memory leak bug in the MBM interface which caused memory allocation errors. - Added BIT version number to the ASCII log file. - Fixed a bug with the 3D Test that was causing it to stop before the autostop timer period - Changed an error in the tape drive test to a warning if tape drive doesn't support setting drive parameters. History of earlier releases: Please see http://passmark.com/products/bit_history.htm Documentation ============= All the documentation is included in the help file. It can be accessed from the help menu. There is also a PDF format Users guide available for download from the PassMark web site. Support ======= For technical support, questions, suggestions, please check the help file for our email address or visit our web page at http://www.passmark.com Ordering / Registration ======================= All the details are in the help file documentation or you can visit our sales information page http://www.passmark.com/sales Compatibility issues with the Network & Parallel Port Tests =========================================================== If you are running Windows 2000 or XP, you need to have administrator privileges to run this test. Enjoy.. The PassMark Development team ...展开收缩
(系统自动生成,下载前可以参看下载内容)
下载文件列表
相关说明
- 本站资源为会员上传分享交流与学习,如有侵犯您的权益,请联系我们删除.
- 本站是交换下载平台,提供交流渠道,下载内容来自于网络,除下载问题外,其它问题请自行百度。
- 本站已设置防盗链,请勿用迅雷、QQ旋风等多线程下载软件下载资源,下载后用WinRAR最新版进行解压.
- 如果您发现内容无法下载,请稍后再次尝试;或者到消费记录里找到下载记录反馈给我们.
- 下载后发现下载的内容跟说明不相乎,请到消费记录里找到下载记录反馈给我们,经确认后退回积分.
- 如下载前有疑问,可以通过点击"提供者"的名字,查看对方的联系方式,联系对方咨询.