文件名称:
linux全志R16的linux系统编译的资料_20170502_1655.7z
开发工具:
文件大小: 2mb
下载次数: 0
上传时间: 2017-05-02
详细说明：
全志R16平台编译linux系统V1.0.txt 2017/4/11 13:36 （编译请使用编译android的lichee的选项编译生成的.config文件，不然直接编译会报错！！！！） rootroot@cm-System-Product-Name:/home/wwt/linux_r16$ tar zxvf lichee_parrotv1.1_20161202.tar.gz rootroot@cm-System-Product-Name:/home/wwt/linux_r16$ cd lichee/ rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ ./build.sh config Welcome to mkscript setup progress All available chips: 0. sun8iw5p1 Choice: 0 All available platforms: 0. android 1. dragonboard 2. linux 3. tina Choice: 2 All available kernel: 0. linux-3.4 Choice: 0 All available boards: 0. bell-one 1. evb 2. evb-20 3. evb-30 4. evb-rtl8723bs 5. sc3813r Choice: 3 rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ ./build.sh 错误1： KCONFIG_AUTOCONFIG=/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/buildroot-config/auto.conf KCONFIG_AUTOHEADER=/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/buildroot-config/autoconf.h KCONFIG_TRISTATE=/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/buildroot-config/tristate.config BUILDROOT_CONFIG=/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/.config /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/buildroot-config/conf --silentoldconfig Config.in # # make dependencies written to .auto.deps # ATTENTION buildroot devels! # See top of this file before playing with this auto-preprequisites! # make[1]:正在离开目录 `/home/wwt/linux_r16/lichee/buildroot' You must install 'makeinfo' on your build machine makeinfo is usually part of the texinfo package in your distribution make: *** [dependencies] 错误 1 make:离开目录“/home/wwt/linux_r16/lichee/buildroot” ERROR: build buildroot Failed rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ d/buildroot-config/conf.o /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/buildroot-config/zconf.tab.o -o /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/buildroot-config/conf rm /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/buildroot-config/zconf.tab.c make[1]:正在离开目录 `/home/wwt/linux_r16/lichee/buildroot/package/config' # # configuration written to /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/.config # make:离开目录“/home/wwt/linux_r16/lichee/buildroot” make:进入目录'/home/wwt/linux_r16/lichee/buildroot' /usr/bin/make -j6 O=/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot silentoldconfig make[1]: 正在进入目录 `/home/wwt/linux_r16/lichee/buildroot' GEN /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/Makefile KCONFIG_AUTOCONFIG=/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/buildroot-config/auto.conf KCONFIG_AUTOHEADER=/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/buildroot-config/autoconf.h KCONFIG_TRISTATE=/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/buildroot-config/tristate.config BUILDROOT_CONFIG=/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/.config /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/buildroot-config/conf --silentoldconfig Config.in # # make dependencies written to .auto.deps # ATTENTION buildroot devels! # See top of this file before playing with this auto-preprequisites! # make[1]:正在离开目录 `/home/wwt/linux_r16/lichee/buildroot' You must install 'makeinfo' on your build machine makeinfo is usually part of the texinfo package in your distribution make: *** [dependencies] 错误 1 make:离开目录“/home/wwt/linux_r16/lichee/buildroot” ERROR: build buildroot Failed rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ sudo apt-get install texinfo [sudo] password for rootroot: 正在读取软件包列表... 完成 正在分析软件包的依赖关系树 正在读取状态信息... 完成 下列软件包是自动安装的并且现在不需要了： fakeroot libalgorithm-diff-perl libalgorithm-diff-xs-perl libalgorithm-merge-perl libfakeroot Use 'apt-get autoremove' to remove them. 将会安装下列额外的软件包： libencode-locale-perl libfile-listing-perl libfont-afm-perl libhtml-form-perl libhtml-format-perl libhtml-parser-perl libhtml-tagset-perl libhtml-tree-perl libhttp-cookies-perl libhttp-daemon-perl libhttp-date-perl libhttp-message-perl libhttp-negotiate-perl libintl-perl libio-html-perl liblwp-mediatypes-perl liblwp-protocol-https-perl libnet-http-perl libtext-unidecode-perl libwww-perl libwww-robotrules-perl libxml-libxml-perl libxml-namespacesupport-perl libxml-parser-perl libxml-sax-base-perl libxml-sax-expat-perl libxml-sax-perl 建议安装的软件包： libdata-dump-perl libintl-xs-perl libcrypt-ssleay-perl libauthen-ntlm-perl texinfo-doc-nonfree 下列【新】软件包将被安装： libencode-locale-perl libfile-listing-perl libfont-afm-perl libhtml-form-perl libhtml-format-perl libhtml-parser-perl libhtml-tagset-perl libhtml-tree-perl libhttp-cookies-perl libhttp-daemon-perl libhttp-date-perl libhttp-message-perl libhttp-negotiate-perl libintl-perl libio-html-perl liblwp-mediatypes-perl liblwp-protocol-https-perl libnet-http-perl libtext-unidecode-perl libwww-perl libwww-robotrules-perl libxml-libxml-perl libxml-namespacesupport-perl libxml-parser-perl libxml-sax-base-perl libxml-sax-expat-perl libxml-sax-perl texinfo 升级了 0 个软件包，新安装了 28 个软件包，要卸载 0 个软件包，有 737 个软件包未被升级。 需要下载 3,425 kB 的软件包。 解压缩后会消耗掉 13.0 MB 的额外空间。 您希望继续执行吗？ [Y/n] y 获取：1 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libencode-locale-perl all 1.03-1 [12.4 kB] 获取：2 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libhttp-date-perl all 6.02-1 [10.4 kB] 获取：3 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libfile-listing-perl all 6.04-1 [9,774 B] 获取：4 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libfont-afm-perl all 1.20-1 [14.3 kB] 获取：5 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libhtml-tagset-perl all 3.20-2 [13.5 kB] 获取：6 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libhtml-parser-perl amd64 3.71-1build1 [98.2 kB] 获取：7 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libio-html-perl all 1.00-1 [15.7 kB] 获取：8 http://cn.archive.ubuntu.com/ubuntu/ trusty/main liblwp-mediatypes-perl all 6.02-1 [21.7 kB] 获取：9 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libhttp-message-perl all 6.06-1 [78.7 kB] 获取：10 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libhtml-form-perl all 6.03-1 [23.5 kB] 获取：11 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libhtml-tree-perl all 5.03-1 [215 kB] 获取：12 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libhtml-format-perl all 2.11-1 [44.7 kB] 获取：13 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libhttp-cookies-perl all 6.00-2 [23.3 kB] 获取：14 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libhttp-daemon-perl all 6.01-1 [17.0 kB] 获取：15 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libhttp-negotiate-perl all 6.00-2 [13.4 kB] 获取：16 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libintl-perl all 1.23-1build1 [1,204 kB] 获取：17 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libnet-http-perl all 6.06-1 [24.2 kB] 获取：18 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libwww-robotrules-perl all 6.01-1 [14.1 kB] 获取：19 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libwww-perl all 6.05-2 [146 kB] 获取：20 http://cn.archive.ubuntu.com/ubuntu/ trusty-updates/main liblwp-protocol-https-perl all 6.04-2ubuntu0.1 [7,644 B] 获取：21 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libtext-unidecode-perl all 0.04-2 [115 kB] 获取：22 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libxml-namespacesupport-perl all 1.11-1 [13.2 kB] 获取：23 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libxml-sax-base-perl all 1.07-1 [21.5 kB] 获取：24 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libxml-sax-perl all 0.99+dfsg-2ubuntu1 [64.6 kB] 获取：25 http://cn.archive.ubuntu.com/ubuntu/ trusty-updates/main libxml-libxml-perl amd64 2.0108+dfsg-1ubuntu0.1 [337 kB] 获取：26 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libxml-parser-perl amd64 2.41-1build3 [294 kB] 获取：27 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libxml-sax-expat-perl all 0.40-2 [11.5 kB] 获取：28 http://cn.archive.ubuntu.com/ubuntu/ trusty/main texinfo amd64 5.2.0.dfsg.1-2 [561 kB] 下载 3,425 kB，耗时 2秒 (1,303 kB/s) Selecting previously unselected package libencode-locale-perl. (正在读取数据库 ... 系统当前共安装有 213805 个文件和目录。) Preparing to unpack .../libencode-locale-perl_1.03-1_all.deb ... Unpacking libencode-locale-perl (1.03-1) ... Selecting previously unselected package libhttp-date-perl. Preparing to unpack .../libhttp-date-perl_6.02-1_all.deb ... Unpacking libhttp-date-perl (6.02-1) ... Selecting previously unselected package libfile-listing-perl. Preparing to unpack .../libfile-listing-perl_6.04-1_all.deb ... Unpacking libfile-listing-perl (6.04-1) ... Selecting previously unselected package libfont-afm-perl. Preparing to unpack .../libfont-afm-perl_1.20-1_all.deb ... Unpacking libfont-afm-perl (1.20-1) ... Selecting previously unselected package libhtml-tagset-perl. Preparing to unpack .../libhtml-tagset-perl_3.20-2_all.deb ... Unpacking libhtml-tagset-perl (3.20-2) ... Selecting previously unselected package libhtml-parser-perl. Preparing to unpack .../libhtml-parser-perl_3.71-1build1_amd64.deb ... Unpacking libhtml-parser-perl (3.71-1build1) ... Selecting previously unselected package libio-html-perl. Preparing to unpack .../libio-html-perl_1.00-1_all.deb ... Unpacking libio-html-perl (1.00-1) ... Selecting previously unselected package liblwp-mediatypes-perl. Preparing to unpack .../liblwp-mediatypes-perl_6.02-1_all.deb ... Unpacking liblwp-mediatypes-perl (6.02-1) ... Selecting previously unselected package libhttp-message-perl. Preparing to unpack .../libhttp-message-perl_6.06-1_all.deb ... Unpacking libhttp-message-perl (6.06-1) ... Selecting previously unselected package libhtml-form-perl. Preparing to unpack .../libhtml-form-perl_6.03-1_all.deb ... Unpacking libhtml-form-perl (6.03-1) ... Selecting previously unselected package libhtml-tree-perl. Preparing to unpack .../libhtml-tree-perl_5.03-1_all.deb ... Unpacking libhtml-tree-perl (5.03-1) ... Selecting previously unselected package libhtml-format-perl. Preparing to unpack .../libhtml-format-perl_2.11-1_all.deb ... Unpacking libhtml-format-perl (2.11-1) ... Selecting previously unselected package libhttp-cookies-perl. Preparing to unpack .../libhttp-cookies-perl_6.00-2_all.deb ... Unpacking libhttp-cookies-perl (6.00-2) ... Selecting previously unselected package libhttp-daemon-perl. Preparing to unpack .../libhttp-daemon-perl_6.01-1_all.deb ... Unpacking libhttp-daemon-perl (6.01-1) ... Selecting previously unselected package libhttp-negotiate-perl. Preparing to unpack .../libhttp-negotiate-perl_6.00-2_all.deb ... Unpacking libhttp-negotiate-perl (6.00-2) ... Selecting previously unselected package libintl-perl. Preparing to unpack .../libintl-perl_1.23-1build1_all.deb ... Unpacking libintl-perl (1.23-1build1) ... Selecting previously unselected package libnet-http-perl. Preparing to unpack .../libnet-http-perl_6.06-1_all.deb ... Unpacking libnet-http-perl (6.06-1) ... Selecting previously unselected package libwww-robotrules-perl. Preparing to unpack .../libwww-robotrules-perl_6.01-1_all.deb ... Unpacking libwww-robotrules-perl (6.01-1) ... Selecting previously unselected package libwww-perl. Preparing to unpack .../libwww-perl_6.05-2_all.deb ... Unpacking libwww-perl (6.05-2) ... Selecting previously unselected package liblwp-protocol-https-perl. Preparing to unpack .../liblwp-protocol-https-perl_6.04-2ubuntu0.1_all.deb ... Unpacking liblwp-protocol-https-perl (6.04-2ubuntu0.1) ... Selecting previously unselected package libtext-unidecode-perl. Preparing to unpack .../libtext-unidecode-perl_0.04-2_all.deb ... Unpacking libtext-unidecode-perl (0.04-2) ... Selecting previously unselected package libxml-namespacesupport-perl. Preparing to unpack .../libxml-namespacesupport-perl_1.11-1_all.deb ... Unpacking libxml-namespacesupport-perl (1.11-1) ... Selecting previously unselected package libxml-sax-base-perl. Preparing to unpack .../libxml-sax-base-perl_1.07-1_all.deb ... Unpacking libxml-sax-base-perl (1.07-1) ... Selecting previously unselected package libxml-sax-perl. Preparing to unpack .../libxml-sax-perl_0.99+dfsg-2ubuntu1_all.deb ... Unpacking libxml-sax-perl (0.99+dfsg-2ubuntu1) ... Selecting previously unselected package libxml-libxml-perl. Preparing to unpack .../libxml-libxml-perl_2.0108+dfsg-1ubuntu0.1_amd64.deb ... Unpacking libxml-libxml-perl (2.0108+dfsg-1ubuntu0.1) ... Selecting previously unselected package libxml-parser-perl. Preparing to unpack .../libxml-parser-perl_2.41-1build3_amd64.deb ... Unpacking libxml-parser-perl (2.41-1build3) ... Selecting previously unselected package libxml-sax-expat-perl. Preparing to unpack .../libxml-sax-expat-perl_0.40-2_all.deb ... Unpacking libxml-sax-expat-perl (0.40-2) ... Selecting previously unselected package texinfo. Preparing to unpack .../texinfo_5.2.0.dfsg.1-2_amd64.deb ... Unpacking texinfo (5.2.0.dfsg.1-2) ... Processing triggers for man-db (2.6.7.1-1) ... Processing triggers for doc-base (0.10.5) ... Processing 1 added doc-base file... 正在设置 libencode-locale-perl (1.03-1) ... 正在设置 libhttp-date-perl (6.02-1) ... 正在设置 libfile-listing-perl (6.04-1) ... 正在设置 libfont-afm-perl (1.20-1) ... 正在设置 libhtml-tagset-perl (3.20-2) ... 正在设置 libhtml-parser-perl (3.71-1build1) ... 正在设置 libio-html-perl (1.00-1) ... 正在设置 liblwp-mediatypes-perl (6.02-1) ... 正在设置 libhttp-message-perl (6.06-1) ... 正在设置 libhtml-form-perl (6.03-1) ... 正在设置 libhtml-tree-perl (5.03-1) ... 正在设置 libhtml-format-perl (2.11-1) ... 正在设置 libhttp-cookies-perl (6.00-2) ... 正在设置 libhttp-daemon-perl (6.01-1) ... 正在设置 libhttp-negotiate-perl (6.00-2) ... 正在设置 libintl-perl (1.23-1build1) ... 正在设置 libnet-http-perl (6.06-1) ... 正在设置 libwww-robotrules-perl (6.01-1) ... 正在设置 libtext-unidecode-perl (0.04-2) ... 正在设置 libxml-namespacesupport-perl (1.11-1) ... 正在设置 libxml-sax-base-perl (1.07-1) ... 正在设置 libxml-sax-perl (0.99+dfsg-2ubuntu1) ... update-perl-sax-parsers: Registering Perl SAX parser XML::SAX::PurePerl with priority 10... update-perl-sax-parsers: Updating overall Perl SAX parser modules info file... Creating config file /etc/perl/XML/SAX/ParserDetails.ini with new version 正在设置 libxml-libxml-perl (2.0108+dfsg-1ubuntu0.1) ... update-perl-sax-parsers: Registering Perl SAX parser XML::LibXML::SAX::Parser with priority 50... update-perl-sax-parsers: Registering Perl SAX parser XML::LibXML::SAX with priority 50... update-perl-sax-parsers: Updating overall Perl SAX parser modules info file... Replacing config file /etc/perl/XML/SAX/ParserDetails.ini with new version 正在设置 texinfo (5.2.0.dfsg.1-2) ... Running mktexlsr. This may take some time. ... done. 正在设置 libwww-perl (6.05-2) ... 正在设置 liblwp-protocol-https-perl (6.04-2ubuntu0.1) ... 正在设置 libxml-parser-perl (2.41-1build3) ... 正在设置 libxml-sax-expat-perl (0.40-2) ... update-perl-sax-parsers: Registering Perl SAX parser XML::SAX::Expat with priority 50... update-perl-sax-parsers: Updating overall Perl SAX parser modules info file... Replacing config file /etc/perl/XML/SAX/ParserDetails.ini with new version rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ ./build.sh http://blog.csdn.net/linuxarmsummary/article/details/12775457 msgfmt包错误 makeinfo 包错误 错误2： e.o -MD -MP -MF .deps/execute.Tpo -c -o execute.o execute.c /usr/bin/gcc -std=gnu99 -I. -O2 -I/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/host/include -I/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/host/usr/include -MT exitfail.o -MD -MP -MF .deps/exitfail.Tpo -c -o exitfail.o exitfail.c In file included from clean-temp.h:22:0, from clean-temp.c:23: ./stdio.h:456:1: error: 'gets' undeclared here (not in a function) _GL_WARN_ON_USE (gets, "gets is a security hole - use fgets instead"); ^ mv -f .deps/exitfail.Tpo .deps/exitfail.Po /usr/bin/gcc -std=gnu99 -I. -O2 -I/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/host/include -I/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/host/usr/include -MT fatal-signal.o -MD -MP -MF .deps/fatal-signal.Tpo -c -o fatal-signal.o fatal-signal.c mv -f .deps/c-ctype.Tpo .deps/c-ctype.Po /usr/bin/gcc -std=gnu99 -I. -O2 -I/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/host/include -I/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/host/usr/include -MT fd-safer-flag.o -MD -MP -MF .deps/fd-safer-flag.Tpo -c -o fd-safer-flag.o fd-safer-flag.c mv -f .deps/c-stack.Tpo .deps/c-stack.Po make[4]: *** [clean-temp.o] Error 1 make[4]: *** Waiting for unfinished jobs.... mv -f .deps/execute.Tpo .deps/execute.Po mv -f .deps/fd-safer-flag.Tpo .deps/fd-safer-flag.Po mv -f .deps/fatal-signal.Tpo .deps/fatal-signal.Po mv -f .deps/gl_avltree_oset.Tpo .deps/gl_avltree_oset.Po make[4]: Leaving directory `/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/host-m4-1.4.15/lib' make[3]: *** [all] Error 2 make[3]: Leaving directory `/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/host-m4-1.4.15/lib' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/host-m4-1.4.15' make[1]: *** [all] 错误 2 make[1]:正在离开目录 `/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/host-m4-1.4.15' make: *** [/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/host-m4-1.4.15/.stamp_built] 错误 2 make:离开目录“/home/wwt/linux_r16/lichee/buildroot” ERROR: build buildroot Failed rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ find . -name stdio.in.h ./out/sun8iw5p1/linux/common/buildroot/build/host-m4-1.4.15/lib/stdio.in.h rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ Z:\home\wwt\linux_r16\lichee\out\sun8iw5p1\linux\common\buildroot\build\host-m4-1.4.15\lib\stdio.in.h // 2017/5/2 14:13 wenyuanbo add!!!! //_GL_WARN_ON_USE (gets, "gets is a security hole - use fgets instead"); #if defined(__GLIBC__) && !defined(__UCLIBC__) && !__GLIBC_PREREQ(2, 16) _GL_WARN_ON_USE (gets, "gets is a security hole - use fgets instead"); #endif http://www.cnblogs.com/hjj801006/p/3988220.html 'gets' undeclared here (not in a function) rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ ./build.sh 错误3： make[3]: Leaving directory `/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/host-autoconf-2.65/lib' Making install in doc make[3]: Entering directory `/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/host-autoconf-2.65/doc' restore=: && backupdir=".am$$" && \ am__cwd=`pwd` && CDPATH="${ZSH_VERSION+.}:" && cd . && \ rm -rf $backupdir && mkdir $backupdir && \ if (/bin/sh /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/host-autoconf-2.65/build-aux/missing --run makeinfo --version) >/dev/null 2>&1; then \ for f in autoconf.info autoconf.info-[0-9] autoconf.info-[0-9][0-9] autoconf.i[0-9] autoconf.i[0-9][0-9]; do \ if test -f $f; then mv $f $backupdir; restore=mv; else :; fi; \ done; \ else :; fi && \ cd "$am__cwd"; \ if /bin/sh /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/host-autoconf-2.65/build-aux/missing --run makeinfo --no-split -I . \ -o autoconf.info autoconf.texi; \ then \ rc=0; \ CDPATH="${ZSH_VERSION+.}:" && cd .; \ else \ rc=$?; \ CDPATH="${ZSH_VERSION+.}:" && cd . && \ $restore $backupdir/* `echo "./autoconf.info" | sed 's|[^/]*$||'`; \ fi; \ rm -rf $backupdir; exit $rc conftest.c:14625: must be after `@defmac' to use `@defmacx' make[3]: *** [autoconf.info] Error 1 make[3]: Leaving directory `/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/host-autoconf-2.65/doc' make[2]: *** [install-recursive] Error 1 make[2]: Leaving directory `/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/host-autoconf-2.65' make[1]: *** [install] 错误 2 make[1]:正在离开目录 `/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/host-autoconf-2.65' make: *** [/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/host-autoconf-2.65/.stamp_host_installed] 错误 2 make:离开目录“/home/wwt/linux_r16/lichee/buildroot” ERROR: build buildroot Failed rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ find . -name autoconf.texi ./out/sun8iw5p1/linux/common/buildroot/build/host-autoconf-2.65/doc/autoconf.texi rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ Z:\home\wwt\linux_r16\lichee\out\sun8iw5p1\linux\common\buildroot\build\host-autoconf-2.65\doc\autoconf.texi @r{[}@var{\varname\}@r{]}@c （修改为：） @r{[}@var{\varname\}@r{]} @r{[}@var{\varname\} = @samp{\default\}@r{]}@c （修改为：） @r{[}@var{\varname\} = @samp{\default\}@r{]} http://blog.csdn.net/laohuang1122/article/details/44098291/ Ubuntu14.04编译Allwinner lichee 两个出错解决方法 rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ ./build.sh 错误4： libtool: install: ranlib /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/host/usr/lib/libfakeroot.a libtool: finish: PATH="/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/host/bin:/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/host/usr/bin:/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/external-toolchain/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/home/cm/cm/R58/r58_new20161012/android/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7/arm-linux-androideabi/bin:/home/cm/cm/R58/r58_new20161012/android/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7/bin:/opt/jdk1.6.0_45/bin:/opt/jdk1.6.0_45/jre/bin:/sbin" ldconfig -n /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/host/usr/lib ---------------------------------------------------------------------- Libraries have been installed in: /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/host/usr/lib If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to `/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- test -z "/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/host/usr/bin" || /bin/mkdir -p "/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/host/usr/bin" /bin/sh ./libtool --mode=install /usr/bin/install -c 'faked' '/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/host/usr/bin/faked' libtool: install: /usr/bin/install -c faked /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/host/usr/bin/faked make[3]:正在离开目录 `/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/host-fakeroot-1.9.5' make[2]:正在离开目录 `/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/host-fakeroot-1.9.5' make[1]:正在离开目录 `/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/host-fakeroot-1.9.5' rm -rf /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/host-makedevs mkdir /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/host-makedevs cp package/makedevs/makedevs.c /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/host-makedevs cc -Wall -Werror -O2 /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/host-makedevs/makedevs.c -o /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/host-makedevs/makedevs /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/host-makedevs/makedevs.c: In function ‘main’: /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/host-makedevs/makedevs.c:374:6: error: variable ‘ret’ set but not used [-Werror=unused-but-set-variable] int ret = EXIT_SUCCESS; ^ cc1: all warnings being treated as errors make: *** [/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/host-makedevs/makedevs] 错误 1 make:离开目录“/home/wwt/linux_r16/lichee/buildroot” ERROR: build rootfs Failed rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ find . -name makedevs.c ./buildroot/package/makedevs/makedevs.c ./out/sun8iw5p1/linux/common/buildroot/build/host-makedevs/makedevs.c ./out/sun8iw5p1/linux/common/buildroot/build/busybox-1.18.3/miscutils/makedevs.c rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ http://blog.csdn.net/laohuang1122/article/details/44098291/ Ubuntu14.04编译Allwinner lichee 两个出错解决方法 rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ ./build.sh 5、编译成功： /local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/home/cm/cm/R58/r58_new20161012/android/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7/arm-linux-androideabi/bin:/home/cm/cm/R58/r58_new20161012/android/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7/bin:/opt/jdk1.6.0_45/bin:/opt/jdk1.6.0_45/jre/bin"" >> /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/_fakeroot.fs chmod a+x /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/_fakeroot.fs /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/host/usr/bin/fakeroot -- /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/_fakeroot.fs rootdir=/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/target table='target/generic/device_table.txt' Warning: skip syncing -d /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/target /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/images/rootfs.ext4 -N 1399 -b 42633 tune2fs 1.42.9 (4-Feb-2014) Creating journal inode: 完成 This filesystem will be automatically checked every 20 mounts or 0 days, whichever comes first. Use tune2fs -c or -i to override. e2fsck 1.42.9 (4-Feb-2014) 文件系统缺少UUID；正在生成一个。 Adding dirhash hint to 文件系统. /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/images/rootfs.ext4: clean, 1009/1440 files, 38102/42633 blocks busybox directfb directfb-examples divine dosfstools e2fsprogs ethtool ext4-utils freetype fsck-msdos fuse-exfat libfuse i2c-tools input-tools iostat iperf iw jpeg libnl libpcap libpng memstat memtester ntfs-3g openssh openssl portmap strace stress sysstat szrz tcpdump tiobench tslib udev which wireless_tools wpa_supplicant zlib target-generic-hostname target-generic-issue target-generic-getty-busybox target-finalize target-purgelocales /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/host/bin:/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/host/usr/bin:/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/host/usr/sbin/:/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/external-toolchain/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/home/cm/cm/R58/r58_new20161012/android/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7/arm-linux-androideabi/bin:/home/cm/cm/R58/r58_new20161012/android/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7/bin:/opt/jdk1.6.0_45/bin:/opt/jdk1.6.0_45/jre/bin make:离开目录“/home/wwt/linux_r16/lichee/buildroot” INFO: build rootfs OK. INFO: ---------------------------------------- INFO: build lichee OK. INFO: ---------------------------------------- rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ 6、打包： rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ ./build.sh pack INFO: packing firmware ... copying tools file copying configs file ./out/aultls32.fex ./out/aultools.fex ./out/cardscript.fex ./out/cardtool.fex ./out/diskfs.fex ./out/env_burn.cfg ./out/env.cfg ./out/image.cfg "./out/image_linux.cfg" -> "./out/image.cfg" ./out/split_xxxx.fex ./out/sys_config.fex ./out/sys_partition_dragonboard.fex ./out/sys_partition_dump.fex ./out/sys_partition.fex "./out/sys_partition_linux.fex" -> "./out/sys_partition.fex" ./out/sys_partition_private.fex ./out/sys_partition_tina.fex ./out/test_config.fex ./out/usbtool.fex ./out/usbtool_test.fex copying boot resource copying boot file packing for linux normal /home/wwt/linux_r16/lichee/tools/pack/pctools/linux/eDragonEx/ /home/wwt/linux_r16/lichee/tools/pack/out Begin Parse sys_partion.fex Add partion boot-resource.fex BOOT-RESOURCE_FEX Add partion very boot-resource.fex BOOT-RESOURCE_FEX FilePath: boot-resource.fex FileLength=453400Add partion env.fex ENV_FEX000000000 Add partion very env.fex ENV_FEX000000000 FilePath: env.fex FileLength=20000Add partion boot.fex BOOT_FEX00000000 Add partion very boot.fex BOOT_FEX00000000 FilePath: boot.fex FileLength=c5a000Add partion rootfs.fex ROOTFS_FEX000000 Add partion very rootfs.fex ROOTFS_FEX000000 FilePath: rootfs.fex FileLength=29a2400sys_config.fex Len: 0xf450 config.fex Len: 0x9ac8 split_xxxx.fex Len: 0x200 sys_partition.fex Len: 0xa80 boot0_nand.fex Len: 0x8000 boot0_sdcard.fex Len: 0x8000 u-boot.fex Len: 0xc4000 fes1.fex Len: 0x1fc0 usbtool.fex Len: 0x23000 aultools.fex Len: 0x26ead aultls32.fex Len: 0x238dd cardtool.fex Len: 0x14000 cardscript.fex Len: 0x6ea sunxi_mbr.fex Len: 0x10000 dlinfo.fex Len: 0x4000 arisc.fex Len: 0x2ed88 vmlinux.fex Len: 0x2c78baa boot-resource.fex Len: 0x453400 Vboot-resource.fex Len: 0x4 env.fex Len: 0x20000 Venv.fex Len: 0x4 boot.fex Len: 0xc5a000 Vboot.fex Len: 0x4 rootfs.fex Len: 0x29a2400 Vrootfs.fex Len: 0x4 BuildImg 0 Dragon execute image.cfg SUCCESS ! ----------image is at---------- /home/wwt/linux_r16/lichee/tools/pack/sun8iw5p1_linux_evb-30_uart0.img pack finish rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ 7、刷机完成开机（请注意：sun8i login: root）： UUUUUUUUUU?UU?UaUaUaUaUaU*UaUaUaUaUaUaUaUaUUa?Ua?UUUUUUUUUUUU[0.33] boot0 version : 4.0.0 [0.35] fel_flag = 0x00000000 [0.38] rtc[0] value = 0x00000000 [0.41] rtc[1] value = 0x00000000 [0.44] rtc[2] value = 0x00000000 [0.47] rtc[3] value = 0x00000000 [0.51] DRAM DRIVE INFO: V1.6 [0.54] DRAM Type =3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3) [0.59] DRAM zq value: 00003bbb[0.62] DRAM CLK =600 MHZ [0.64] ID CHECK VERSION: V0.1 [0.67] using ic R16 [0.69] USE PLL DDR1 [0.75] USE PLL NORMAL [0.77] PLL FREQUENCE = 1200 MHZ [0.90] DRAM PLL DDR1 frequency extend open ! [0.94] DRAM master priority setting ok. [0.108] Auto calculate timing parameter! [0.111] para_dram_tpr0 = 0047a14f [0.114] para_dram_tpr1 = 01c2294c [0.118] para_dram_tpr2 = 00069049 [0.121] tcl = 6,tcwl = 4 [0.123] DRAM TIMING PARA0 = 0b0f180c [0.126] DRAM TIMING PARA1 = 0003040f [0.130] DRAM TIMING PARA2 = 0406050a [0.133] DRAM TIMING PARA3 = 0000400c [0.137] DRAM TIMING PARA4 = 05020405 [0.140] DRAM TIMING PARA5 = 05050403 [0.144] DRAM TIMING PARA8 = 90003310 [0.147] DRAM PHY INTERFACE PARA = 02040102 [0.151] DRAM VTC is disable [0.153] DRAM dynamic DQS/DQ ODT is on [0.157] DRAM DQS gate is PD mode. [0.160] DRAM one rank training is on,the value is 91003587 [0.169] DRAM work mode register value = 004318e4 [0.173] DRAM SIZE =512 M [0.175] set one rank ODTMAP [0.180] DRAM simple test OK. [0.182] dram size =512 [0.184] card boot number = 2 [0.187] card no is 2 [0.189] sdcard 2 line count 8 [0.192] [mmc]: mmc driver ver 2015-01-15 14:21:39 [0.203] [mmc]: ***MMC card 2*** [0.227] [mmc]: 8bit ddr!!! [0.229] [mmc]: MMC ver 4.41 [0.232] [mmc]: SD/MMC Card: 8bit, capacity: 3728MB [0.237] [mmc]: vendor: Man 00150100 Snr 00ef0719 [0.241] [mmc]: product: M4G1F [0.244] [mmc]: revision: 4.2 [0.247] [mmc]: ***SD/MMC 2 init OK!!!*** [0.250] sdcard 2 init ok [0.254] The size of uboot is 000c4000. [0.312] sum=ad4be991 [0.313] src_sum=ad4be991 [0.316] set_mmc_para,sdly 50M 0 [0.319] set_mmc_para,sdly 25M 0 [0.322] Succeed in loading uboot from sdmmc flash. [0.326] Ready to disable icache. [0.330] Jump to secend Boot. [ 0.332]U-Boot 2011.09-rc1-00019-g42e29c6-dirty (Mar 19 2015 - 17:08:40) Allwinner Technology [0.346]normal or secure os [0.348]pmbus: ready [0.350]PMU: AXP221 [0.352]PMU: AXP22x found [0.355]bat_vol=0, ratio=100 [0.357]PMU: dcdc3 1200 [0.360]PMU: pll1 1008 Mhz,PLL6=600 Mhz [0.363]AXI=336 Mhz,AHB=200 Mhz, APB1=100 Mhz [0.370]set power on vol to default [0.373]dcdc1_vol = 3000 [0.375]dcdc2_vol = 1100 [0.377]dcdc3_vol = 1200 [0.380]dcdc4_vol = 0 [0.382]dcdc5_vol = 1500 [0.384]aldo2_vol = 2500 [0.386]aldo3_vol = 3000 [0.388]find power_sply to end [0.468]vbus exist [0.469]no battery, limit to dc [0.472]fel key new mode [0.474]run key detect [0.487]no key found [0.488]no key input [0.490]dram_para_set start [0.494]dram_para_set end [0.496]DRAM: [0.498]512[0.498] MiB [0.500]relocation Offset is: 15b0a000 [0.541]smcl's set manager is NULL [0.544] [0.546]workmode = 0 [0.548]MMC: 2 [0.549][mmc]: mmc driver ver 2014-12-10 9:23:00 [0.554][mmc]: get sdc_phy_wipe fail. [0.557][mmc]: get sdc0 sdc_erase fail. [0.560][mmc]: get sdc_2xmode ok, val = 1 [0.564][mmc]: get sdc_ddrmode ok, val = 1 [0.568][mmc]: get sdc_f_max fail,use default 50000000Hz [0.573][mmc]: get card_line ok, card_line = 8 [0.577][mmc]: get sdc_ex_dly_used fail,use default [0.581][mmc]: SUNXI SD/MMC: 2[0.584] [0.595][mmc]: MMC card 2* [0.633][mmc]: ddr8 [0.643][mmc]: CID 0x1501004d 0x34473146 0x4200ef07 0x19dcce21 [0.648][mmc]: MMC ver 4.41 [0.650][mmc]: mmc clk 50000000 [0.653][mmc]: SD/MMC Card: 8bit, capacity: 3728MB [0.657][mmc]: boot0 capacity: 1000KB,boot1 capacity: 1000KB [0.663][mmc]: ***SD/MMC 2 init OK!!!*** [0.667][mmc]: erase_grp_size:0x400WrBlk * 0x200 = 0x80000 Byte [0.672][mmc]: secure_feature 0x15 [0.675][mmc]: secure_removal_type 0x0 [0.679]sunxi flash init ok In: serial Out: serial Err: serial [0.691]--------fastboot partitions-------- [0.695]-total partitions:5- [0.697]-name- -start- -size- [0.701]boot-res : 1000000 1000000 [0.706]env : 2000000 1000000 [0.710]boot : 3000000 1000000 [0.714]rootfs : 4000000 20000000 [0.718]UDISK : 24000000 0 [0.723]----------------------------------- [0.726]base bootcmd=run setargs_nand boot_normal [0.731]bootcmd set setargs_mmc [0.734]key 0 [0.735]cant find rcvy value [0.737]cant find fstbt value [0.740]no misc partition is found [0.743]to be run cmd=run setargs_mmc boot_normal [0.747]WORK_MODE_BOOT [0.749]board_status_probe [0.752]sunxi_bmp_logo_display [0.756] ** Unable to read "bootlogo.bmp" from sunxi_flash 0:1 ** [0.761]sunxi bmp info error : unable to open logo file bootlogo.bmp [0.767]Hit any key to stop autoboot: 0 [0.771]read boot or recovery all [1.63]sunxi flash read :offset 3000000, 13995844 bytes OK [1.72]no signature [1.73]ready to boot [1.75]para err in disp_ioctl, cmd = 0xa,screen id = 1 [ 1.080]Starting kernel ... [ 0.940677] [audiocodec] linein_to_spk_used type err! [ 0.946281] [audiocodec] linein_to_hp_used type err! [ 0.951806] [audiocodec] linein_to_aif2_used type err! [ 0.957502] [audiocodec] sysaudio_to_aif2_used type err! [ 0.963409] [audiocodec] : aif3 not used! [ 0.971957] [I2S0]sunxi-i2s0 cannot find any using configuration for controllers, return directly! [ 0.982149] [I2S]sndi2s0 cannot find any using configuration for controllers, return directly! [ 0.991735] [I2S1]sunxi-i2s1 cannot find any using configuration for controllers, return directly! [ 1.001881] [I2S]sndi2s1 cannot find any using configuration for controllers, return directly! [ 1.019623] otg_wakelock_init: No USB transceiver found [ 1.025634] ths_fetch_sysconfig_para: type err device_used = 1. [ 1.033262] fetch C0_LV_count from sysconfig failed Welcome to sun8i linux sun8i login: root # pwd /root # # # busybox BusyBox v1.18.3 (2017-05-02 14:51:20 CST) multi-call binary. Copyright (C) 1998-2009 Erik Andersen, Rob Landley, Denys Vlasenko and others. Licensed under GPLv2. See source distribution for full notice. Usage: busybox [function] [arguments]... or: busybox --list[-full] or: function [arguments]... BusyBox is a multi-call binary that combines many common Unix utilities into a single executable. Most people will create a link to busybox for each function they wish to use and BusyBox will act like whatever it was invoked as. Currently defined functions: [, [[, addgroup, adduser, ar, arping, ash, awk, basename, bunzip2, bzcat, cat, catv, chattr, chgrp, chmod, chown, chroot, chrt, chvt, cksum, clear, cmp, cp, cpio, crond, crontab, cut, date, dc, dd, deallocvt, delgroup, deluser, devmem, df, diff, dirname, dmesg, dnsd, dnsdomainname, dos2unix, du, dumpkmap, echo, egrep, eject, env, ether-wake, expr, false, fdflush, fdformat, fdisk, fgrep, find, fold, free, freeramdisk, fsck, fuser, getopt, getty, grep, gunzip, gzip, halt, hdparm, head, hexdump, hostid, hostname, hwclock, id, ifconfig, ifdown, ifup, inetd, init, insmod, install, ionice, iostat, ip, ipaddr, ipcrm, ipcs, iplink, iproute, iprule, iptunnel, kill, killall, killall5, klogd, last, length, less, linux32, linux64, linuxrc, ln, loadfont, loadkmap, logger, login, logname, losetup, ls, lsattr, lsmod, lspci, lsusb, lzcat, lzma, makedevs, md5sum, mdev, mesg, microcom, mkdir, mkdosfs, mke2fs, mkfifo, mkfs.ext2, mkfs.vfat, mknod, mkswap, mktemp, modinfo, modprobe, more, mount, mountpoint, mpstat, mt, mv, nameif, netstat, nice, nohup, nslookup, od, openvt, passwd, patch, pidof, ping, pipe_progress, pivot_root, poweroff, printenv, printf, ps, pwd, rdate, readahead, readlink, readmbr, readprofile, realpath, reboot, renice, reset, resize, rm, rmdir, rmmod, route, run-parts, runlevel, sed, seq, setarch, setconsole, setkeycodes, setlogcons, setsid, sh, sha1sum, sha256sum, sha512sum, sleep, sort, start-stop-daemon, strings, stty, su, sulogin, swapoff, swapon, switch_root, sync, sysctl, syslogd, tail, tar, tee, telnet, test, tftp, time, top, touch, tr, traceroute, true, tty, udhcpc, umount, uname, uniq, unix2dos, unlzma, unxz, unzip, uptime, usleep, uudecode, uuencode, vconfig, vi, vlock, watch, watchdog, wc, wget, which, who, whoami, xargs, xz, xzcat, yes, zcat # cd / # pwd / # ls -l total 2156 drwxrwxr-x 2 root root 2048 Dec 2 2016 bin drwxr-xr-x 2 root root 1024 Jan 1 00:00 boot drwxr-xr-x 8 root root 3000 Jan 1 00:00 dev drwxr-xr-x 8 root root 1024 May 2 2017 etc drwxrwxr-x 3 root root 1024 May 2 2017 home lrwxrwxrwx 1 root root 11 May 2 2017 init -> bin/busybox drwxr-xr-x 4 root root 2048 May 2 2017 lib lrwxrwxrwx 1 root root 11 May 2 2017 linuxrc -> bin/busybox drwx------ 2 root root 2182144 May 2 2017 lost+found drwxrwxr-x 2 root root 1024 May 2 2017 mnt drwxrwxr-x 2 root root 1024 May 2 2017 opt dr-xr-xr-x 82 root root 0 Jan 1 00:00 proc drwxrwxr-x 2 root root 1024 Jan 1 00:00 root drwxr-xr-x 2 root root 2048 May 2 2017 sbin dr-xr-xr-x 13 root root 0 Jan 1 00:00 sys drwxrwxr-x 5 root root 1024 Dec 2 2016 test drwxrwxrwt 2 root root 80 Jan 1 00:00 tmp drwxrwxr-x 6 root root 1024 Dec 2 2016 usr drwxrwxr-x 4 root root 1024 May 2 2017 var # # # lsmod Module Size Used by Not tainted # # # ifconfig # # ping www.baidu.com ping: bad address 'www.baidu.com' # # ...展开收缩
(系统自动生成,下载前可以参看下载内容)
下载文件列表
相关说明
- 本站资源为会员上传分享交流与学习,如有侵犯您的权益,请联系我们删除.
- 本站是交换下载平台，提供交流渠道，下载内容来自于网络，除下载问题外，其它问题请自行百度。
- 本站已设置防盗链，请勿用迅雷、QQ旋风等多线程下载软件下载资源，下载后用WinRAR最新版进行解压.
- 如果您发现内容无法下载，请稍后再次尝试；或者到消费记录里找到下载记录反馈给我们.
- 下载后发现下载的内容跟说明不相乎，请到消费记录里找到下载记录反馈给我们，经确认后退回积分.
- 如下载前有疑问，可以通过点击"提供者"的名字，查看对方的联系方式，联系对方咨询.
