您好,欢迎光临本网站![请登录][注册会员]  
文件名称: 博世 VSS7390 / VS7390 系列 4 路输入彩色切换台系统 用户使用说明书.pdf
  所属分类: 其它
  开发工具:
  文件大小: 903kb
  下载次数: 0
  上传时间: 2019-10-19
  提 供 者: weixin_********
 详细说明:博世 VSS7390 / VS7390 系列 4 路输入彩色切换台系统 用户使用说明书pdf,博世 VSS7390 / VS7390 系列 4 路输入彩色切换台系统 用户使用说明书VSS7390/01T Switcher Operating Instructions Chapter 1 EN 3 Caution Warning Danger of explosion if batteries are incorrectly This device is intended for use in public areas replaced. Replace only with the same or equiva- only. Surreptitious recording of oral lent type communications is strictly prohibited by U.S Federal lay Remark Bosch has a strong commitment towards the environment. This monitor has been designed to respect the environment as much as possible 1.1.1 FCC Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and. if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio r television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is con- nested Consult the dealer or an experienced radio/TV technician for help Note Any change or madification not expressly approved by Bosch of the cquipment authorization could void the ser's authority to operate the equipment For additional information or to speak to a representative, please contact the Bosch Security Systems location nearest you or visit our web site at www.boschsecuritvsvstems.coim (See: Your Guide To Observation Bosch Security Systems 2003-06 VSS7390/01T Switcher Operating Instructions Chapter 1 EN 4 1.2 NTRODUCTION ACTION FUNCTION With the action feature you Read these instructions carefully can control external devices For details on the installation see installation connected to an external Instructions supplied action box, e.g. to remotely open a door The bosch Observation System is a sophisticated, easy to-operate observation and security system. Up to 4 PIP (Picture-In-Picture)Provides cameras can be observed a small camera picture within The system also supports the following fcatures a full screen camera picture ZOOM FUNCTIoN Zooms the full screen live mage to twice its size DAY/NIGHT By pressing just one button you can set the system in PLAY BACK When selected, it wo different modes to DETECTION automatically detects when activate the day or night the video recorder is in alarm profile of your system playback mode and will Day/Night mode can also be display the recorded images activated from an optiona Alarm/Action box HISTORY LIST The history list shows al ROTARY WHEEL By simply rotating and caused by an alarm pressing the rotarY wheel doorbell, motion or a special ou can operate and control alarm the complete system in a very convenient way. AUTO ACKNOWLEDGE When there is an alarm the system automatically SEQUENCE Automatic camera sequence acknowledges the alarm and switching, with adjustable replays the event(if event dwell time replay is activated )after the programmed alarm duration ON SCREEN DISPLAY Operation and programming has expired (can be set from of the system is performed 5 sec. to 15 min) hrough On Screen Display (OSD)menus. With these easy to use menus you can SLAVE DISPLAY Lets you display the images set up the system to your from the main monitor own needs (Follow) or from any camera INSTALLATION WIZaRD The installation wizard on the slave monitor( 1-4) guides you through the systcm menus step by step PRESENTATION An advanced feature to show MODE promotional videos. It can be sequenced with a live camera image MOTION DETECTIoN The observation cameras automatically detect motion within a defined motion area TALK FUNCTION Built-in loudspeaker and microphone for intercom option AUDIO audio from the cameras is supported and can be heard through the system loudspeaker Bosch Security Systems 2003-06 VSS7390/01T Switcher Operating Instructions Chapter 1 EN 5 -e6( 1.3 ACCESSORIES The system can be extended by one or more system accessories. For details scc Your Guide To Observation Cameras( to a maximum of 4) Infra Red Remote Control Time lapse) Video Recorder (VCR) Digital recorder · Cable extension box · Intercom box Alarm/action box · Interface box Slave monitor to a maximum of 2 Protect Outdoor camera housing Outdoor camera housing assembly Audio/Video(A/v) cable Audio/Video(A/v)extension cable Bosch Security Systems 2003-06 VSS7390/01T Switcher Operating Instructions Chapter 2 EN6 2 BASIC OPERATION A moon symbol is visible on the screen when you arc in night mode Operation and programming of the system is performed Note that if the video and audio of the monitor are set through On Screen Display(osD)menus. With these off in the night mode, the camera continues to transmit. easy to use menus you can setup the system to your own images and sound to the video recorder, slave and needs aux output 21 OPERATOR CONTROLS External Day/Night Switch The functional operation of the bosch observation You can install an optional Alarm/Action box to System Switcher is as follows activate the Day /Night Switch. When the External Day/ Night Switch is used, the Day/Night Switch on the 2.1.1 Power switch monitor and Remote Control are deactivated Read the instructions before putting your system in Remark eration When switching over from day to night mode, the Toggle the power switch located at the rear of the actual night profile is activated when the programmed monitor to switch the system on/off. A lEd on the exit delay time has expired. The led color changes front of the monitor indicates the system mode accordingly The following text appears on the monitor screen An alarm generated during night mode will be x xx= version number processed by the system after the entry delay time has After a while the camera image appears on the monitor expired. If the system is switched from night to day screen mode during the entry delay time the alarm will not be processed. Exceptions are special alarms, like tamper 2.1.2 Day/Night and system alarms, which will always be processed The system can be set in two different modes, DAY Mode and NIGHT Modc. Thesc two modes arc sct up LED indication is as follows in the System setup menus and allow different ED is OFF Observation System off configurations for day operation and night-time opcration. For cxample, in night timc opcration, the LED is Green Observation System is in DAY MODE display picture can be switched off, alarm inputs enabled. etc LED is amber observation System is in NIGHT MODE with the screen display Day mode function disabled In the day mode the image and sound of the monitor LEd is Red are switched on and the day alarm profile is enabled Observation System is in NIGHT MODE with the screen display Night mode function enabled In the Night mode, the night alarm profile is enabled ED is blinking Alarm indication Availability of image and audio is configured in the system settings Fiqure 2.1 Front Pane/ Sequence Zoom Pig PpSa Day/Night Volume CO(CG GCG Talk Action Bosch Security Systems 2003-06 VSS7390/01T Switcher Operating Instructions Chapter 2 EN 7 2.1 3 Volume 2.1.9 Zoom To change the audio volume of the cameras, intercom The image will be displayed in full screen and is boxes and Video Recorder, push the VOLume button digitally zoomed two times. The zoom button toggles it will pop out) and rotate as required. Note that the the zoom mode ON/OFF. If the zoom mode is active, beep"volume is controlled via the system setup menu. turning the ROTARY wheel scrolls the zooming area through the nine pre-defined positions. A zoom symbol 2.1 4 Talk is displayed. The zoom function is active for 30 se cs or Select the camera designated to the intercom box and until the zoom button is pressed before thc 30 sccond press talK to speak through the intercom(optional) period. Release the button to allow your visitor to speak to you Remark The talk function is only functional in combination with This mode is only functional in live mode when the an intercom box (optional) respective connected camera has zoom function 2.1.5 Action Select the camera designated to the action box and press 2.1.10 Picture-In-Picture(PIP) The pip button toggles the picture-In-picture On/off the action button to control external devices. for example to open a door). As long as ACtiON is (only in FULL Scrccn mode pressed, a buzzer sounds, thc action symbol is visible on Keeping the PIP button pressed while turning the rota the monitor and the audio is set out wheel will scroll through all connected cameras Keeping the PIp select button pressed while pressing the Remark sequence button will toggle the sequence setting of the The action button is only functional in combination PiP picture ON/OFF with an Alarm/Action box (optional) The PlP position can be changed via the View Settings menu 2.1. 6 ROTARY Wheel During normal operation the ROTaRY wheel is used to 2. 1.11 PIP Swap sclect cameras. To acknowledge alarms, press the rotary The PIP Swap button toggles the PIP image with the full wheel, unless auto acknowledge is selected screen image. Turn the rotary wheel to select the previous or next camera. Audio of the selected camera is activated 22 MENU OPERATION Press the menu button to display the on screen main 2.1.7 Menu menu. Toggle to switch ON/OFF After pressing the: MENU button, the main menu will Remark be displayed. For a detailed description of the menu If no selection is made within 30 seconds the on screen operation see Chapter 2.2 display menu is automatically switched off 2.1. 8 Sequence MENU NAVIGATION The monitor displays the connected camera images in Follow the screen options and select using the sequence. The dwell time(sequence time) is set up in ROTARY wheel the systcm setup menus The rOtArY wheel controls the menu navigation as The camera title and the sequence symbols are visible follows on the screen To scroll up/down the menu, turn the ROTaRY Remark indicates the selected menu option This mode is only functiona l when the observation Pressing the rotary wheel will either show the systcm has more than onc camera available options(e. g ON or OFF), or display the sub-me Bosch Security Systems 2003-06 VSS7390/01T Switcher Operating Instructions Chapter 2 EN 8 To dccrcasc, increasc or change the valuc of a 2.2.3 View settings menu selected menu item turn the rotary wheel and The view settings menu enables you to change the acknowledge by pressing the ROTARY wheel display on your monitor To return to the previous menu, turn the ROTARY MAIN MENU wheel until the previous menu title is highlighted and acknowledge by pressing the rotary wheel VIEW SETTINGS After pressing the menu button the following menu will PIP POSITION be displayed HIDE TITLES MAIN MENU HIDE TIME/DATE HISTORY BRIGHTNESS SWITCH TO PLAYBACK VIEW CONTRAST VIEW SETTINGS COLOR TIME/ DATE SHARPNESS SYSTEM SETTINGS CANCEL The following view settings can be altered 2.2.1 History The history table shows all events that were caused by PIP POSITION Sct PIP(Picture-In-Picture) to top an alarm, doorbell, motion Or special alarm right, bottom right, top left, bottom left(shown by the quad image MAIN MENU moving within the symbol) HISTORY HIDE TITLEs Show or hide camera names in EVENT SOURCE TIME DD-MM Fullscreen. Quad and 3x3 mode MOTION CAMERA 1 9: 23 24-01 Options are NO/YES When you select HISTORY a list with the kind of alarm HIDE TIME/ Show or hide time and date event), the source, time and date is displayed DATE Options are No/YES A maximum of 20 events are stored in the history list first in, first out). You can scroll through the history list BRIGHTNESS Adjust the screen image brightness by turning the rOtarY wheel Events that are recorded are CONTRAST Adjust the screen image contrast Al COLOR Adjust the screen image color · Motion SHARPNESS Adjust the screen image Tamper arnes Doorbell HUE Fail Adjust the screen · Power (NTSC ONLY m sources arc CANCEL Cancel any changes made, and · Camera-name return to original settings Intercom (only in case of Fail RCB (only in case of Fail) 2.2.4 Time/Date Action/ Alarm box(only in case of Fail) The time/date menu enables you to change the time nd date display on your monitor. 2.2.2 Switching between playback and live MAIN MENU SWITCH To You can switch between playback TIME/DATE PLAY BACK view(looking at images from a HOUR FORMAT 12H VIEW Video Recorder)or live view TIME 01:16:01AM (looking at live camera images DATE FORMAT DD-MM-YYYY DATE 01-01-2001 Bosch Security Systems 2003-06 VSS7390/01T Switcher Operating Instructions Chapter 2 EN 9 To show or reset alarm, switch over from night modc HOUR FORMAT Allows you to set the hour format to day mode (12H/24H option) Monitor in night mode(display ON AT ALARM): TIME Allows you to set the system time Same as in night mode(display OFF)with the exception DATE FORMAT Allows you to set the date format (DD/MM/YYYY or Monitor display is switched on if an alarm is MM/DD/YYYY or activated and it will display the image of the camera YYYY/MM/DD that has been activated DATE Allows you to set the system date If there is no user activity, the system will automatically switch back to night mode display 2.2.5 System Settings OFF within 15 minutes. If there is user activity the System settings are described in the Installation user must switch the display off by pressing the Day/ Instructions Night Switch 2 3 ALARM FUNCTIONS 2.3.1 Reset Alarm The alarm function can be enabled or disabled in the The alarm can be reset in two ways: alarm profile. When motion is detected by a camera or Manual reset: when an alarm is triggered by an Action/Alarm box Resets the alarm whenever the rotary wheel is (optional), the alarm function is activated ressed. The monitor returns to the status before the In case of an al alarm occurre Monitor in day mode When the cause of the alarm has not been eliminated The monitor selects the respective camera input of the monitor continues to display the alarm symbol the Alarm/Action box When the rotary wheel is not pressed during an The blinking alarm symbol is displayed on the alarm, the monitor automatically acknowledges the alarm after default 30 secs (programmable range from 5 monitor screen The power Led starts to blink sec. to 15 min ). The monitor returns to the status before The alarm output contact is activated (horn, siren or the alarm occurred. The blinking alarm message is dis telephone selector)and a buzzer sounds for default P layed until the rotary wheel is pressed 30 secs (programmable range from 5 sec. to 15 min ) Auto acknowledge The history table is updated with the alarm event. When there is an alarm, the system automaticall Alarm event string is visible at the bottom of the acknowledges the alarm after the programmed alarm monitor screen until alarm is acknowledged. You can duration has expired(can be sct from 5 scc to 15 min) manually acknowledge alarms or select auto acknowledge Note If the display is in sequence mode during an alarm, it Monitor in night mode(display on) automatically returns to sequence mode, starting with Same as in day mode with the exception of the next image after the alarm image An alarm generated in this night mode will be processed by the systcm aftcr the entry dclay timc 2.3.2 Recorded Alarms has expired. If the system switches over from night to During playback the recorded alarms will be visible day during the entry delay time the alarm will not be Should an alarm be received during playback, the processed. Exceptions are special alarms, like tamper system will return to live mode and system alarms, which will always be processed Monitor in night mode(display OFF): ame as in night mode(display on with the exception The buzzer docs not sound Bosch Security Systems 2003-06 VSS7390/01T Switcher Operating Instructions Chapter 2 EN|10 2.3.3 Special Alarms A special alarm is given in case of TAMPER An accessory housing has been opened FAIL a failure in the system communication to accessories or camera has been found Press the RotaRY wheel to stop the alarm Detailed information of the alarm is stored in the history table 2.4 DOORBELL OPERATION If the doorbell button on the intercom box is pressed the following functions are activated The monitor automatically selects the camera input to which the intercom box is connected The blinking bcll symbol is displayed on the monitor screen as long as the doorbell button is pressed The history table is updated Remark The doorbell function is only functional in combination with an intercom box option. If remote option is selected, the doorbell can also trigger the alarm output contact of the system monitor Bosch Security Systems 2003-06
(系统自动生成,下载前可以参看下载内容)

下载文件列表

相关说明

  • 本站资源为会员上传分享交流与学习,如有侵犯您的权益,请联系我们删除.
  • 本站是交换下载平台,提供交流渠道,下载内容来自于网络,除下载问题外,其它问题请自行百度
  • 本站已设置防盗链,请勿用迅雷、QQ旋风等多线程下载软件下载资源,下载后用WinRAR最新版进行解压.
  • 如果您发现内容无法下载,请稍后再次尝试;或者到消费记录里找到下载记录反馈给我们.
  • 下载后发现下载的内容跟说明不相乎,请到消费记录里找到下载记录反馈给我们,经确认后退回积分.
  • 如下载前有疑问,可以通过点击"提供者"的名字,查看对方的联系方式,联系对方咨询.
 输入关键字,在本站1000多万海量源码库中尽情搜索: