文件名称:
Pantron高性能光电开关说明书.pdf
开发工具:
文件大小: 3mb
下载次数: 0
上传时间: 2019-10-13
详细说明:Pantron高性能光电开关说明书pdf,Pantron高性能光电开关说明书Contents
paniron
Transmitter
4
Receiver
4-7
Sensor heads
Description
8
1-channel amplifier
9-12
2-channel multiplexer
13
ISM-Series
4-channel multiplexer
14
8-channel multiplexer
15
Description
1-channel amplifer
17-25
1-channel automatic-amplifier
26-33
sG-Series
1-channel measurement-amplifer
34
Description
35
2-channel multiplexer
3639
4-channel multiplexer
40-41
MX-Series
8-channel multiplexer
42-43
2-channel automatic-multiplexer
44-47
8-channel automatic-multiplexer
48-49
Transmitter
50-51
Receiver
5253
SlimLine
Power supply unit
54-55
Protective enclosure
56-57
Connection cable
8
Accessories
Other accessories
59
approvals. C匪
All technical specifications refer to the state
△
Safety instructions:
the devices are not to be used fo
applications where personal safety is
of the art 04/2004- They are subject to
dependent on their function
modifications
Sensor heads
Extremely dirt-resistant
Connection diagram
High penetration
Large detection range
Cable version
Small design
Transmitter
Receiver
High switching accuracy
core-colo
connection core-color
connection
Easy adjustment
Red
Yellow
Black
Shiela
Plug version(core colours)
Description
Transmitter
Receiver
core-color
connection core-color
connection
The transmitter and receiver have a special small design
國(bown
④(back)
which allows them to be used in micro constructions
③(bue)
③(bue)
The sensor heads are fully sealed, giving them a high
④
l12④十③
protection class of IP 67. It is possible to use the sensor
heads in areas with extremely high humidity and dust
A wide opening angle allows easy adjustment at detection
ranges up to approximately 35 m and enables the
sensors to be insensitive to vibration shock and
Note
misalignment
The sensor heads are only for use with
amplifier and multiplexer type ISM., ISG
or MX
Technical Data (at +2CC)
Ambient temperature
-25°Cto+65°C(-13°Fto149°F)
Storage temperature
C(-40Fto176°F)
Vibration
10.5Hz,1,5mm
Shock
g
Protection class
P67
Transmitter
T
Transmit light
Infrared 880 nm. modulated Infrared 870 nm. modulated Infrared 870 nm. modulated
Transmit power(F= 1C0 mA)
40 mW/ sr
70 mW/ sr
350 mW/sr
Opening angle
6
Cable sheath
PVC, 04, 8 mm *0, 2 mm, black
Cable core
2×0,25mm,red/ black
Receive
Type
IR. or IRH
Opening angle
Light immunit
40000LUX
60000LUX
Cable sheathing
PVC. 04 .8 mm +0.2 mm black
Cable core
1 x0. 34 mm yellow shielded
Transmitter
Transmitter
Transmitter
Receiver
Connection Material
Outline- Picture
rawing
IT-P10-5m
IT-P10HP-5mITA-TLP-5
IR-P10-5m
able 5m
picture 1
-P10-15m
IT-P10HP-15mIITA-TLP-15
R-P10-15m
cable 15 m
IT-P10-3QDIT-P10HP-3QDITA-TLP-B3 IR-P10-3QD plug M8 plastic
picture 2
TL-SLP-5
ITH-SLP-5
ITA
IRH-SLP-5
cable 5m
cture 3
ITL-SLP-15
ITH-SLP-15 ITA-SLP-15 IRH-SLP-15 cable 15 m
ITL-SLP-B3ITH-SLP-B3 ITA-SLP-B3IRH-SLP-B3 plug M8 plastic
pIc
cture 4
paniron
Transmitter
Transmitter
Transmitter
Receiver
Connection Materia
Outline
ITH
ITA
Picture
rawing
IT-M12-5mIT-M12HP-5m ITA-CLN-5 IR-M12-5m cable 5m nickel plated
IT-M12-15mIT-M12HP-15m ITA-CLN-15IR-M12-15m cable 15 m brass
IT-M12VA-5mIT-M12VAHP-5m ITA-CLV-5IR-M12VA-5m cable 5m
picture 5
IT-M12VA-15m IT-M12VAHP-15mITA-CLV-15
stainless steel
IR-M12VA-15m cable 15 m
T-M12-3QD
T-M12HP-3QD ITA-CLN-B3
IR-M12-3QD plug M8
nickel plated
brass
T-M12VA-3QDIT-M12VAHP-3QD ITA-CLV-B3IR-M12VA-3QD plug M8 stainless steel
IT-M12-4QDIT-M12HP-40D ITA-CLN-C4IR-M12-40D plug M12 b
nickel plated
picture 7
IT-M12VA-4QD IT-M12VAHP-4QDITA-CLV-C4IR-M12VA-4QD plug M12 stainless steel
IT-AE-5m
IR-AE-5m
cable 5m
pla
picture 8
IT-AE-15m
IR-AE-15m
cable 15 m
IT-AE-3OD
-AE-3OD
plug M8 pla
picture 9
As-5m
IR-AS-5m
cable 5m
plas
IT-AS-15m
IR-AS-15m
cable 15 m
As-3QD
IR-AS-3QD plug M8 plastic
picture 11
IT-SLA-5n
IT-SLAHP-5mITA-LLA-5
IR-SLA-5m
cable 5m
aluminium
picture 12 C
T-SLA-15m IT-SLAHP-15mITA-LLA-15
IR-SLA-15I
cable 15 m
IT-SLA-3QD
IT-SLAHP-3QDITA-LLA-B3
IR-SLA-3Qd plug M8
aluminium
cture 13
ITL-TSP-5
ITH-TSP-5
ITA-TSP-5
IRL-TSP-5
cable 5m
plastic
picture 14
ITL-TSP-15
ITH-TSP-15
ITA-TSP-15
IRL-TSP-15
cable 15m
ITL-TSP-B3
ITH-TSP-B3
ITA-TSP-B3
IRL-TSP-B3 plug M8 plastic
picture 15
ITL-SSP-5
ITH-SSP-5
ITA-SSP-5
IRL-SSP-5
cable 5m
plastic
picture 16
ITL-SSP-15
ITH-SSP-15
ITA-SSP-15
IRL-SSP-15
cable 15m
ITL-SSP-B3 ITH-SSP-B3 ITA-SSP-B3 IRL-SSP-B3 plug M8 plastic
ITL-CSN-5
ITH-CSN-5
ITA-CSN-5
IRL-CSN-5 cable 5m nickel plated
ITL-CSN-15 ITH-CSN-15 ITA-CSN-15 IRL-CSN-15 cable 15 brass
ITL-CSN-B3ITH-CSN-B3 ITA-CSN-B3IRL-CSN-B3 plug M8 brass Alater/ pitr
ITH-CSV-5ITA-CSV-5
cable 5m
ITL-CSV-15ITH-CSV-15 ITA-CSV-15
IRL-CSV-15 cable 15 m stainless ste
picture 19
ITL-CSV-B3ITH-CSv-B3 ITA-CSv-B3IRL-CSv-B3 plug M8
stainless steel
nickel plated
ITL-CSN-C4ITH-CSN-C4IA-CSN-C4 IRL-CSN-C4 plug M12brass
非
picture 20
ITL-CSV-C4 ITH-CSV-C4ITA-CSV-C4 IRL-CSV-C4 plug M12 stainless steel
Sensor heads
Dimension drawings (in mm)
Transmitter Receiver
Transmitter Receiver
Transmitte
Receiver
Transmitter
Receiver
210
Q10
16
016
f
Picture 1
Picture 2
Picture 3
Picture 4
Transmitter Receiver
Transmitter Receiver
Transmitter Receiver
V8
Picture 5
Picture 6
Picture 7
Transmitter
Receiver
Transmitter
eceiver
ransmitter
Receiver
DIN74Hm3
DIN74.Hm
2
Picture 8
Picture 9
Picture 10
technology
Transmitter
Receive
Transmitter
Receiver
Transmitter
ceiver
Picture 11
Picture 12
Picture 13
Transmitter Receiver
Transmitter Receiver
Transmitter
Receiver
010
10
216
M8
Picture 14
Picture 15
Picture 16
Transmitter Receiver
Transmitter Receiver
Transmitter Receiver
Transmitter Receiver
M12x1
Picture 17
Picture 18
Picture 19
Picture 20
SM-Series
Description
The ISM-Series is a new development of the amplifiers, type ISG-.and IMX-.... in modern housings with rail-mounting
The processor-controlled devices operate with modulated infrared light, which provides high immunity to ambient light
The electronic circuit is designed to detect only those signals with the correct frequency and phase relation. In addition
to 1-channel amplifiers, there are also 2-, 4-and 8-channel devices available, which operate as multiplexers. the
adjustment of transmit-power in these new amplifiers and multiplexers may be either done manually or switched to
automatic adustment PC-Software is available for the ISM-4000A and ISM-8000A which allows easy control of the
devices
Alarm output/display"Alarm"resp."Limit
LED lights up( Sensor Error). Additionally, an LED shows the
A signal is given, before the limit of transmit-power is reached. user, whether the transmitter or receiver is affected. This LED
At the same time an LEd shines red(Alarm display)
flashes slowly for open and fast for short-circuit state
The system is, however, still fully functional
Relay output(only ISM-1220A)
Analog output
The relays are generally designed as floating relays
The analog output helps alignment of the sensor heads and
provides a voltage from 0-10V DC, which is proportional to
Switching behavior
the received signal
This describes the behavior of the switching output, when the
beam is interrupted When the amplifier is set to light mode
Automatic-operation
there is a constant output as long as the beam is present. In
The processor-controlled automatic amplifier(patented dark mode, the output occurs only when the beam is
Pantron invention)is the further development of the standard interrupted
amplifier. No adjustments are required. The switching point
adjusts automatically according to the predominate switching delay(only ISM-1220A)
conditions(dirt, dust, ambient light etc. )so that it remains Switching-on or switching-off delay controls the reaction of
constant. This insures optimum performance from the the relay-output between 0 and 10 seconds
system at all times
Switching output
Error output
The switching output, a short-circuit proof MOS-Relay( closed
See permanent sensor-control
switch), responds to the interruption of the beam
Switching reaction(only ISM-1220A)
The gain control display shows the user whether the automatic The user can select between lasting(delayed) reaction and
control is working. When the display goes out, the automatic impulse reaction with adjustable period from 0 to 10 seconds
control is set
System power
Intensity display
A few devices have different preset power ranges
The green intensity display stays lit when the transmit-power Test function
is sufficient. If it flashes or goes off completely, then the trans- To determinate malfunctions or defects at the sensor heads
mit-power setting is too low, the transmitter and /or receiver a control unit is included on some devices. By pressing a
optical systems are too polluted, the distance between button, the test function is activated. The device will indicate
transmitter and receiver is too far, or they are slightly out of whether the transmitter or the receiver is defective. If nothing
alignment
is defective, the test function shows the signal quality
Light-curtain(only ISM-4000A and ISM-8000A
An LEd flashes from 1 up to 10 times. The flashes are propor
When one of the beams is interrupted, one collective output tional to the received signal
occurs
Test input
Manual-operation
To test the function of the sensor the transmitter can for
example, be switched off by a Plc in order to check whether
The user must use a control to adjust the transmit-powet the switching status changes at the relay or switching output
to the desired value. As the environment changes, the user
must adjust the control to compensate
of the amplifier
Transmit frequency
Master-Slave operation(only ISM-4000A and ISM-8000A)
The transmit frequency means the modulation frequency, by
With series connection, additional multiplexers may be which the amplifier works. Included on several types of
added
amplifiers and multiplexers there are two or four transmit
Output status display
frequencies selectable by switches
The yellow output status display is lit constantly, when the Transmitter and receiver connections
output is active
All transmitter and receiver connections on the amplifier
Permanent sensor-conti
are short-circuit proof. Therefore, it is not possible to damage
The processor supervises the sensor heads permanently
the inputs, even in the case of unintentional short-circuits
If the resistance of one of the sensor-heads changes, a red
ISM-Series
1-channel amplifier ISM-1000.
panitan
Detection range up to 55 m(180 ft)
Sensitivity adjustable with potentiometer
Switching output 60V/100 mA-short circuit proof
Test input
o○o
Technical data at.+20°c(+68°F
Supply power
24VDc/±20%/2,4VA
Operating basis
nodulated IR-light
Transmit frequency [kHz] 3, 9
Transmit power
manual adjustable
Switching behavior light
System Power
high
Output status
LED
yeow
●9HHU
Switching delay/impulse period
Intensi
LED green
Switching output
NO (Semiconductor-Relay)
panton
60 V DC(AC)/100 mA
reaction-time
24 ms
Gain setting
Alarm-Error-output
Max load
Analog output
0.. DC
Housing material
NORYL, gray RAL 7035
Protection class
|P20
on temperature
50°c(-13F….+122F)
Purchase order table
Order code
with plug
ISM-1000/24VDC
with screw terminals
ISM-1000S/24VDC
Accessories
Protective enclosure
Pan Box1×1
ax range
Receiver RL
Receiver IrH
Transmitter ITL
7m(23t)
15m(49ft
Transmitter ITH
.5 m( 82 ft)
Transmitter ITA.20 m(66 ft) 55 m(180 ft)
Connection diagram
sup
switching output
ge
V/100
24VDC
ground
NC
④---
black
yellow
test input
transmitter receiver
24V DC/2mA
ISM-Series
1-channel amplifier ISM-1100
Detection range up to 55 m(180 ft)
4 different selectable transmit frequencies
Sensitivity adjustable with potentiometer
System power high low switchable
Switching output 60V/100 mA- short circuit proof
Switching behavior light / dark selectable
Alarm output
Test input
L凵
Technical data at.+20°c(+68°F)
Supply power
24VDC/±20%/2,4VA
Oper
rating basis
modulated IR-light
3.53,7/4,0/4,5
Transmit power
Manual /automatic
Switching behavior
Light/Dark
Output sta
vDc寺L、 L ALAR
System Power
High/ LoW
Switching delay/impulse period
LED green
Switching output
NO (Semiconductor-Relay)
60 V DC(AC)/100 mA
LED red
reaction-time
24 ms
Gain setting
Alarm-, Error-output
pnp, 24VDC
Device settings
4-fold DIP.sv itc
Max load
100mA
Analog output
Test input
0.30V DC
②②②②②②
Housing material
NORYL, gray RAL 7035
Protection class
P20
Operation temperature
5°∴+50°c(-13°F….+122F)
Purchase order table
Connection Order code
with plug
SM-1100/24VDC
with screw terminals
ISM-1100S/24VDC
DIP-switch setting (factory sotting is marked in groy)
Ac
acessories
high
1 System Power
Protective enclosure
PanBox 1x1
2 Switching behavior
Max range
3, 5 kHz 3. 8 kH7 4,0kH74,5kHz
Receiver IRL
ReceiverIRH.
Transmitter Tl
7 m(23 ft)
15m(49t
Transmit frequency
Transmitter ITH
10m(33ft)
25m(82ft)
Transmitter ITA.20m(66 ft) 55 m(180 ft)
Connection diagram
supply
switching output alarm output
voltage
60/100 mA
24VDC
ground 9
Load
PE
NC
black
shield
transmitter receiver
24V DC/2mA
10
(系统自动生成,下载前可以参看下载内容)
下载文件列表
相关说明
- 本站资源为会员上传分享交流与学习,如有侵犯您的权益,请联系我们删除.
- 本站是交换下载平台,提供交流渠道,下载内容来自于网络,除下载问题外,其它问题请自行百度。
- 本站已设置防盗链,请勿用迅雷、QQ旋风等多线程下载软件下载资源,下载后用WinRAR最新版进行解压.
- 如果您发现内容无法下载,请稍后再次尝试;或者到消费记录里找到下载记录反馈给我们.
- 下载后发现下载的内容跟说明不相乎,请到消费记录里找到下载记录反馈给我们,经确认后退回积分.
- 如下载前有疑问,可以通过点击"提供者"的名字,查看对方的联系方式,联系对方咨询.